Sign up for price drop notifications!
- Premium Quality CAT6a U/FTP LSZH Cable - Pure Copper - DATA SPEEDS OF 10GB per second up to 100m
- PLEASE NOTE - Standard CAT5 RJ45 connectors will NOT fit this cable. 100m, 50m & 25m lengths may not be supplied on a reel.
- Colour – Purple (signifies the Low Smoke, Zero Halogen Rating)
- Conductor Area CSA: 8 x 0.251mm² (23 AWG) - Conductor Material – Solid Oxygen Free Copper
- Available in the following lengths – 305m, 100m, 50m & 25m
Details: Uses - This premium cable is commonly used for networking and AV installations. It can be cut to length and fitted with 8P8C FTP connectors (also called RJ45 FTP), the standard PC networking connector. If you plan to fit these yours. Each twisted pair within has its own foil shield which helps in areas where there is a lot of interference, to make sure the shield is utilised, please make sure your RJ45 sockets are shielded too.
Made From - Pure copper conductors, this cable has been tested and is certified to the CAT6a specification and is perfectly fine for use over longer distances.
Low Smoke Zero Halogen (LSZH) - Low smoke zero halogen cable is made of thermoplastic that emits a limited amount of smoke and no halogen when exposed to high heat sources such as fire. In a fire, a halogen-containing plastic material releases hydrogen chloride, a poisonous gas that forms hydrochloric acid when it comes in contact with water. Commonly used in buildings for safety in the event of a fire.
Ease of Use - To make measuring easy the cable is marked at 1 metre intervals.
No. of Cores: 8
Quality CAT6A 4 pair network cable
U/FTP - Each twisted pair is mylar foil wrapped
Suitable for up to 10000Mbps @ 100m
Outer Diameter - 7.5mm
PVC Outer Layer - LSZH rated & 0.55mm thick
Return loss >25dB @100m
Attenuation <45.3dB @100m
Phase delay <570ns
Wiring - Depending on the application in which you hope to use it, the cable can be wired in both the 'straight through' or 'cross-over' configurations.
Variants - The 2 wiring configurations for CAT5/CAT6 cable. TIA/EIA-568-A & TIA/EIA-568-B have no technical differences between them. However, they connect the wires to the connector in a different order.